Page 5 of 8
Before Each Use
Solar lights require sunlight to function properly. Extended periods of cloudy weather will cause
shorter runtimes. Shade on the solar panel is to be avoided. The solar panel may be cleaned with a
clean damp cloth. Do not use soap, solvents, or abrasives.
Operating Instructions
Before the light can operate to its full capacity, allow the unit to charge in sunlight for days with
the solar panel wire connected to the light.
Charging sho
Twist off the glass cover: The light has 3 positions: OFF / AUTO / ON.
Switch to the OFF position and the light will stay off.
Switch to the AUTO position and the light fixture will be off during the day and turn on at
night. The light brightness can be controlled from low light or high light mode with the remote
control.
Switch to the ON position and the light fixture will stay on
day and night
. The brightness can be controlled from low light or high light mode with the
remote control.
Location of Solar Light
Solar powered lights require sunlight to recharge the internal batteries. For best results, locate the
solar panel in a position where it will receive direct sunlight, generally free from cover and shade.
5. Pull the tape out before using the remote control
