background image

 

                    Page    of 7     

How   to   use   Switch   

•        You   can   choose   3   ways   to   use   the   switch   under   the   battery   housing   of   the   Lamp(1).   
•        OFF                        Middle   position   
When   you   do   not   need   lightening.   
•        ON                            Left   position   
                                                    Light   can   be   used   as   a   standard   light.   
                       
   
                                Camping,   Fishing,   Emergency   and   so   on.   
•        AUTO                    Right   position   
                                                    Light   turns   on   automatically.   
                                                       
   
Entrance,   Garage,   porch,   Eaves   and   so   on.   
   

   

   

How   to   use   Control   Knobs   

•        The   Solar   Sensor   Light   has   3   different   Control   Knobs   which   control   the   light’s   duration,   sensitivity   to   
light   and   sensitivity   to   motion-­‐see.   
   
   

   

   

LUX   (Light   level)       

1)

 

The   LUX   Adjusting   Knob(10)   tells   the   sensor   the   level   of   darkness   that   must   be   reached   before   the   light   turns   
on.   

2)

 

If   set   to   the   maximum   

    level,   the   light   will   go   on   in   most   situation   ranging   from   dark   to   daylight.

   

   

Summary of Contents for 1200








Reviews: