8
1.
Place one compartment divider
(#827406 ) on bottom floor as shown
BELOW.
NOTE POSITION OF FLOOR SEAM.
Ventilation holes are up.
Three square tabs
go into
“
D
”
holes in floor.
Bend tabs against
straight side of
“
D
”
on
underside
of floor.
Place a compartment divider
with plug
(#827408 ) adjacent to the first divider
ALONG FLOOR SEAM
and
slide rear panel
into slot provided
on the installed divider.
Bend tabs as before.
Tab shown protruding through
“
D
”
slot on
underside
of floor
Bend flat with finger
Insert tab into
“
D
”
slot
3 Tab Locations
Sections Interlock
Ventilation holes
Note position of floor seam.
UNDERSIDE OF FLOOR
FLOOR SEAM
FLOOR SEAM
HOUSE ASSEMBLY INSTRUCTIONS
•
ROOM DIVIDERS
