6
7
• 12/24 hour:
format selectable (initial model: 12 hour)
• Alarm:
3 sets alarms , Alarm clock with “Beep
Beep Beep ” lasting 1 minute.
• Voice control:
Open “Power Saving Mode”
(display onSd), after 30s no any press, LED
display automatically closed, enter into power
saving mode, but background keep timing
and temperature, and save the setting before.
• Power:
DC6V / 1000mA / AAA battery , inside
with button cell, maintain normal timing
although power off.
• Input Voltage:
DC5V
• Working Power:
5W
• Chargering voltage:
5V
• Chargering Current:
500mA-1000mA
• Working Distance:
6mm
• Chargering Efficiency:
75%
• Standered:
QI Wireless Chargering Standered
OPERATION
IMPORTANT NOTE
1. SETTING
• Press button “set” for 2 seconds to enter into set-
ting mode: Adjust 12/24 hour format by press UP
& DOWN. Under 12 hour format, afternoon PM
will be on light;
• Press SET into Hour Adjustment, hour flash, then
adjust it by press UP & DOWN, Long press the
key to fast forward, fast rewind. Then press SET
into Minute adjustment, Minute flash, then ad-
just it by press UP & DOWN, Long press to fast
forward, fast rewind .
• Under Date Mode, long press SET 2 seconds into
Year, Month, Date setting, adjust by press UP &
DOWN, and long press to fast forwarder, fast
rewind.
• Under Time Mode, press SET twice into Mode of
Alarm 1, Alarm 2, Alarm 3.
• Under Alarm Mode, the default of display A1(2/3),
press UP to start Alarm, and display oNA1 (2/3)
and AL sign, then switch to alarm timing auto-
matically. Long press SET 2 seconds into Alarm
Setting, adjust it by press UP/DOWN, long press
to fast forward, fast rewind .
2. SETTING (DOWN)
• Long press DOWN 2 seconds( not under setting
& alarm Mode), adjust °C/°F.
• Press Down (Not under setting & Not alarm
Mode), Start (onSd )/ Close (-- Sd) voice control.
3. SETTING (UP)
• Under Time, Date, Temperature Mode, press UP
to adjust dP-1, dP-2, dP-3 mode switch.
•
Wireless charging: connect the USB cable
power supply, mobile phone placed on the tops
of the products in the area of wireless charging
is charging.
For the AAA battery ,better to use high-capacity alkaline battery, immediately replace batteries of
power shortage to avoid battery leakage, or else it may damage the product and voice of guarantee,
please keep in mind!
Display 1 (Dp-1)
- Time and temperature display.
- To see the date: press the SET button.
- The display will automatically reset to time
and temperature.
Display 2 (Dp-2)
- Default time display. The display does not
automatically show the date.
- If you press the «SET» button once, the display
will show the date. However, the display will
again indicate the time again if you press any
button.
Display 3 (Dp-3)
- Default time display. The display does not
automatically show the date.
- If you press the «SET» button once, the display
will show the date. The display will
automatically show the time after 15 seconds.
- If you press the «SET» button twice to enter the
defined alarm mode, the display will automati-
cally indicate the time after 15 seconds.
The temperature displace is fixed in all 3 display
modes.
DE
LESEN SIE DIESE ANLEITUNG
SORGFÄLTIG DURCH UND
BEWAHREN SIE DIESE GUT AUF
BENENNUNG DER TASTEN
RESET
DOWN
UP
SET
DC
WARNHINWEIS
Bei der Aufladetechnik mittels Induktion sind einige Hinweise zu beachten:
• NICHT AUF EINER METALLFLÄCHE ABSTELLEN (Z. B. EINEM TISCH AUS METALL).
• VON HITZEQUELLEN BZW. FEUCHTIGKEIT FERNHALTEN.
• MENSCHEN MIT HERZSCHRITTMACHER DÜRFEN SICH NICHT IN UNMITTELBARER NÄHE DES GERÄTS AUFHALTEN.
• BATTERIEN SOLLTEN ENTFERNT WERDEN, WENN DIE UHR LÄNGERE ZEIT NICHT BENUTZT WIRD.
Achtung! Batterien sollten nicht übermäßiger Hitze ausgesetzt werden, wie sie unter anderem durch Sonnenlicht
und Feuer erzeugt wird. Bitte entsorgen Sie verbrauchte Batterien umweltgerecht.
