8
Multipurpose Ozonator
User Manual
1. Remove from the package and make sure
all components are present.
2. Select a location on a wall out of children’s
reach, adjacent to a power source. If using
in the kitchen or bathroom, make it higher
than the water faucet.
3. Connect the power cable to the power inlet
at the back. Tidy up the cables with the
cable slots in the product, and then plug
it to the mains. The unit will emit a beep
and the LED panel will display 4 lights to
indicate that power is connected.
4. When injecting ozone into the water,
connect the silicon tubing to the ozone
outlet, and another end to the stone
diffuser. Ensure good ventilation to avoid
breathing any excess ozone.
5. When using as an air purifier, direct the
hose without stone diffuser to the area you
wish to treat and seal off that area as best
as possible.
6. If treating a vehicle or caravan, plug into
a 12V socket, and seal up. Ensure that no
humans or animals are inside the car or
van while operating.
7. There are two modes of operation:
1. Mode A
- manual operation mode.
2. Mode B
- automatic operation mode.
This option should be used if you wish
to run a regular cycle, for example 15
minutes per day. Please ensure that
no humans or animals will be subject
to breathing ozone gas if the unit is on
automatic mode.
OPERATING INSTRUCTIONS
