19
o
Insert a new filter cartridge making sure that it slips down over the sump
standpipe. The sediment filter (white) installs on the left (inlet) side. The carbon
filter (black with netting) installs on the right side.
o
Screw the sump onto the cap and hand tighten. DO NOT OVER-TIGHTEN.
Make sure that the filter cartridge slips over the cap standpipe.
o
Repeat this process to change the other filter cartridge.
o
Turn on the main water supply line and check for any leaks from the housing.
o
Re-install the filter box cover and restore the power to the unit and make any
necessary changes and calibration
7.4 Replacing the Air Filter (DIAGRAM 7)
o
Turn-off the power switch and Disconnect the electric power cord from the
outlet.
o
Remove the top cover of the unit by removing the two screws near the front.
Then, lift the front of the top and push back.
o
Lift the air filter up and out of the cabinet.
o
Slide a new air filter into place
o
Replace the top and install the two screws to secure the top cover.
8.
SPARE PARTS:
Use exclusively original parts. Contact your authorized service center or the
main office of the Natura Water, Inc.
9.
Manufacturer’s Main Office Address and Contact Numbers:
NATURA WATER, INC with headquarters
222 East Campus View Blvd
Columbus, Ohio 43235
10.
11.
