MASCHINE Getting Started – 55
7.1 Editing a Sample
Hardware
With Button 2 you can reach the Edit Tab to edit the recorded Sample.
Change the Start and End point of the Sample with Rotary Encoder 1 and 2.
Enable Loop Mode by pressing the right Page Button to navigate to the second page
and then turn Rotary Encoder 1.
Adjust the Start and End point of the Loop on the second page using Rotary Encoders
2 and 3.
The Edit Tab with a Loop
4.
Since we recorded a drumloop in Sync, there is no need to adjust Start and End of
the Sample or the Loop, but we have to enable Loop as described above.
Software
In the Edit Tab, you can do the following: adjust Start and End of the Sample, enable the
Loop Mode, adjust Start and End Points of the Loop, or set a Crossfade.
Select the Edit Tab by clicking on it.
Adjusting the Start and End point is done by either dragging the small grey icons la-
beled “S” (for Start) and “E” (for End) using the mouse, or by entering the Start and
End points in their respective fields.
1.
2.
3.
1.
2.
!
For external Samples coming
from an instrument that is not
synced to MASCHINE by way of MIDI
Clock, it is more useful to record it ma-
nually or in Threshold Mode.
Summary of Contents for Maschine
Page 1: ...GETTING STARTED...
