GUITAR RIG KONTROL Hardware Reference – 19
You can access the Driver Control Panel by clicking on “ASIO Config”. In the Driver Control
Panel, two status fields on the bottom show whether the
RIG KONTROL
hardware is
connected and ready to use.
The audio interface allows to be configured by the following parameters:
►
P
resets
: Several presets for common types of usage are included, from minimal
latency suitable for fast systems with strong CPU power, to higher latencies suitable
for slower systems. If you are experienced in setting up audio drivers and want to
create your own custom settings, select
User Defined Settings
(see next).
►
UsB B
Uffersize
and
a
Udio
B
Uffersize
: These parameters are grayed out, unless you have
selected
User Defined Settings
from the Presets Menu. Together, they define the
system’s latency, i.e. the time that passes from the moment an audio signal is sent
into the RIG KONTROL hardware until the moment you hear it in your headphones or
your speakers. The value for Audio Buffersize must always be at least twice as large
as the USB Buffersize value. Note that the USB Buffersize parameter has a direct
impact on the CPU usage of the system. The resulting CPU usage differs between
computers, so it could make sense to experiment with different settings.
Summary of Contents for Guitar Rig Kontrol
Page 1: ...HARDWARE REFERENCE ...
