3.1. MAIN UNIT REPLACEMENT
Follow the procedure below to disassemble the main block.
1. Remove Cap, Foil frame and Inner blades.
2. Loosen the two bottom screws and remove the bottom
cover.
3. Take out the chassis block from housing by pushing the
base of chassis.
4. Remove the trimmer driving bar.
5. Loosen the two screws and lift the rubber retaining plate
away.
6. Remove the driving head water proof rubber.
7. Remove the blade holder block.
NOTE: When reassembling, replace the new waterproof
rubber.
3 DISASSEMBLY / ASSEMBLY INSTRUCTIONS
3
ES4001
