background image

3

Installation

Do not attempt to install the air conditioner by yourself.

Consult the service shop or a qualified technician.

Incorrect work will result in water leakage, electric shocks or fire. For installation, consult the service
shop where you bought the unit or a qualified technician.

WARNING

The air conditioner must be earthed.

Incomplete earthing may result in electric
shocks.
Do not connect the earth line to a gas pipe,
water pipe, lightening rod, or a telephone
earth line.

Do not install the air conditioner in places
where flammable gas may leak.

If leaked gas should accumulate near the unit,
fire may occur.

Depending on the environment, an earth
leakage breaker must be installed.

Lack of an earth leakage breaker may result in
electric shocks.

Arrange the drain hose to ensure smooth
drainage.

Incomplete drainage may cause wetting of the
building, furniture etc.

CAUTION

 

 

Installation site

To install the air conditioner in the following types of
environments, consult the shop.

Places with an oily ambient or where steam or soot occurs.

Salty environment such as coastal areas.

Places where sulfide gas occurs such as hot springs.

Places where snow may block the outdoor unit.

The drain from the outdoor unit must be discharged to a place
of good drainage.

  

Consider nuisance to your neighbours from noises.

For installation, choose a place as described below.

A place solid enough to bear the weight of the unit which does not amplify the operation noise or vibration.

A place from where the air discharged from the outdoor unit or the operation noise will not annoy your neighbours.

 

  Electrical work

For power supply, be sure to use a separate power circuit dedicated to the air conditioner.

  

System relocation

Relocating the air conditioner requires specialized knowledge and skills. Please consult the shop where you bought the air

conditioner if relocation is necessary for moving or remodeling.

To prevent inter-
ference, place it
at least 1 m away.

A place with
good
ventilation

Wall

Air
outlet

Air
inlet

For efficient operation, take as large

spaces around the unit as site allows.

Summary of Contents for CS-MC120AKH

















Reviews: