9
AM
AM
l
l
l
l
l
l
l
l
l
AM
Timer Operation
AM
Notes on OFF TIMER
•
When the OFF TIMER is set, the air conditioner automatically
adjusts the temperature setting (0.5°C up in COOL) to
prevent excessive cooling for your pleasant sleep.
Timer functions are useful for automatically switching
the air conditioner on or off at night or in the morning.
You can also use OFF TIMER and ON TIMER in
combination.
1
Press
OFF-TIMER
while the air conditioner
is operating.
•
Check that the clock is correct.
If not, set the clock to the present time. (See page 7.)
Press
CANCEL
.
Then the TIMER lamp lights up.
■
To cancel the timer:
Press
OFF-TIMER
once again.
Then the TIMER lamp goes off.
OFF TIMER operation
Display
Press
until the time setting
reaches the point you like.
•
Every pressing of either button increases or decreases
the time setting by ten minutes. Holding down either
button changes the setting rapidly.
AM
l
l
l
l
l
l
l
l
l
l
Display
AM
is displayed.
blinks.
2
3
Press
ON-TIMER
while the air conditioner
is not operating.
Press
ON-TIMER
once again.
Press
until the time setting
reaches the point you like.
•
Every pressing of either button increases or decreases
the time setting by ten minutes. Holding down either
button changes the setting rapidly.
is displayed.
blinks.
Display
ON TIMER operation
1
2
3
Combining ON TIMER and OFF TIMER
•
A sample setting for combining the two timers is shown below.
Display
Present time: 11:00 PM
(The unit operating)
OFF TIMER at 0:00 a.m.
ON TIMER at 7:00 a.m.
Combined
(Example)
Notes on ON,OFF TIMER
•
When ON TIMER is set, the present time is not displayed.
•
Once you set ON,OFF TIMER, the time setting is kept in the
memory. (The memory is canceled when remote controller
batteries are replaced.)
•
When operating the unit via the ON/OFF Timer, the actual length
of operation may vary from the time entered by the
user.(Maximum approx. 10 minutes.)
➡
AM
AM
Display
Press
CANCEL
.
■
To cancel the timer:
Then the TIMER lamp goes off
.
■
In the following cases, set the timer again.
•
After a breaker has turned OFF.
•
After a power failure.
•
After replacing batteries in the remote controller.
ATTENTION
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling
effect in any operation mode. You can get the
maximum capacity with a touch of a button.
•
Pressing the (POWERFUL) button during operation starts
POWERFUL operation.
•
POWERFUL operation ends in 20 minutes. Then the system
automatically operates again with the settings which were
used before POWERFUL operation.
Press
POWERFUL
.
Display
■
To cancel POWERFUL operation:
Press
POWERFUL
.
Notes on POWERFUL operation
•
In COOL mode
To maximize the cooling effect, the temperature setting is
fixed to 18°C and the air flow rate is fixed to the maximum
setting.
The temperature and air flow settings are not variable.
•
In DRY mode
The temperature setting is lowered by 3°C and the air flow
rate is slightly increased.
•
In FAN mode
The air flow rate is fixed to the maximum setting.
1
Then the TIMER lamp lights up.
•
Check that the clock is correct. If not, set the clock to the
present time (See page 7).
FILTER
POWER
TIMER
OFF/ON