background image

Guarantee

www.nationalequipment.com

Phone: 763-315-5300

27

National Flooring Equipment, Inc. (National) warrants to the fi rst consumer/purchaser that this National brand product (3402 Heavy-Duty Dust 
Collector
) when shipped in its original container, will be free from defective workmanship and materials and agrees that it will, at its option, 
either repair the defect or replace the defective product or part thereof at no charge to the purchaser for parts or labor for the period(s) set forth 
below.

This warranty does not apply to any appearance items of the product, to the additional excluded items set forth below, or to any product, the 
exterior of which has been damaged or defaced, which has been subjected to misuse, abnormal service or handling, or which has been altered 
or modifi ed in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to 
National.

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. All implied warranties 
including the warranties of merchantability and fi tness for use are limited to the periods from the date of purchase as set forth below. Some 
states do not allow time limitations on an implied warranty, so the above limitation may not apply to you.

Neither the sales person of the seller, nor any other person, is authorized to make any other warranties other than those described herein, or to 
extend the duration of any warranties beyond the time period described herein on behalf of National.

The warranties described herein shall be the sole and exclusive warranties granted by National and shall be the sole and exclusive remedy 
available to the purchaser. Correction of defects in the manner and for the period of time described herein, shall constitute complete fulfi llment 
of all liabilities and responsibilities of National to the purchaser with respect to the product and shall constitute full satisfaction of all claims, 
whether  based on contract, negligence, strict liability or otherwise. In no event shall National be liable, or in any way responsible for any dam-
age or defects in the product which were caused by repairs or attempted repairs performed by anyone other than National. Nor shall National be 
liable, or in any way responsible, for any incidental or consequential, economics or property damage. Some states do not allow the exclusion of 
incidental or consequential damages, so the above exclusion may not apply to you.

This warranty gives you specifi c legal rights. You may also have other rights which vary from state to state.

WARRANTY PERIOD

The3402 Heavy-Duty Dust Collector is guaranteed to be free of manufacturer defective workmanship and in quality of materials for a period of 
one year. 

Items excluded from warranty coverage, unless found and reported defective immediately upon removal from the original shipping container 
and before being used by the original purchaser.

A freight damage claim must be fi led with the carrier by the purchaser, the shipper cannot fi le the freight claim.

TO OBTAIN SERVICE CONTACT NATIONAL FLOORING EQUIPMENT, INC. TOLL FREE AT 800-245-0267 FOR A REPAIR 
AUTHORIZATION NUMBER. COD FREIGHT RETURNS WILL NOT BE ACCEPTED. FREIGHT COLLECT SHIPMENTS WILL 
NOT BE ACCEPTED. WARRANTY REPAIRS MUST BE ACCOMPANIED BY DATE OF PURCHASE RECEIPT AND A RETURN/
REPAIR AUTHORIZATION NUMBER. 

RETURN/REPAIR AUTHORIZATION NUMBER:  _____________________________________________

MACHINE SERIAL NUMBER: ____________________________________________________________

Summary of Contents for 3402





























Reviews: