Build/Compile a Project using Code Composer Studio v6
Builds may take up to a minute to compile, or longer for a first time build.
shows the state of a
successful build:
Figure 18. Successful Build of UCD3138 Related Source Code
When the build has finished, the
.x0
file should be created and will be placed in the project directory’s
debug
folder. The filename that prefaces the
.x0
will be the name of the project that was built (i.e. a
project named
UCD3138_Lab_02_solution
will create
UCD3138_Lab_02_solution.x0
as its firmware
file). However, it must be noted that
the project name must have no spaces
, otherwise the .x0 file will not
be generated.
This
.x0
file can be and run on the UCD3138 target device using the
UCD3XXX / UCD9XXX Device GUI
.
20
Summary of Using Code Composer Studio v6
SLUUB82 – March 2015
Copyright © 2015, Texas Instruments Incorporated
