National Semiconductor UCD3138ACCEVM149, User Manual

Page: 17 / 25

Appendix A
SLUUB82 – March 2015
Summary of Using Code Composer Studio v6
In this appendix, the basic steps of how to use Code Composer Studio v6 to compile firmware for
UCD3138 family of devices is described. A design flow is described while detailed steps for firmware code
creation, and firmware debugging along with hardware are obviously beyond the scope of this user’s guide
and this appendix.
A.1 Importing a CCSv6 project
Upon running CCSv6 for the first time, the Workspace Launcher window will appear as shown in
Figure 14 . It is left to the user do decide whether or not to use a workspace, where it is located, and/or to
check the box that says Use this as the default and do not ask again . For this guide, a workspace will
not be used, so click OK .
Figure 14. CCSv6 Workspace Launcher
17 SLUUB82 – March 2015 Summary of Using Code Composer Studio v6
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated