20
Use only approved accessories. Do not connect incompatible products.
Connecting to other devices
When connecting to any other device, read its user’s guide for detailed safety instructions. Do not
connect incompatible products.
Chemicals
Do not store or use the Compact Flash in places where it may be exposed to chemicals or chemical
vapors. Doing so will lead to fires or electric chocks.
Prohibited areas
Do not use the Compact Flash when the use of a Bluetooth application is prohibited or when it may
cause interference or danger
Humid or dusty places
Do not store or use the Compact Flash in humid or dusty places. Doing so could lead to fires or
electric chocks.
Do not disassemble or modify the Compact Flash in any way
Do not disassemble or modify the Compact Flash in any way. Doing so without the express approval
by the manufacturer will void user authority to operate the equipment and may lead to fires or electric
shocks.
Switch off near a microwave oven in use
Do not use the Bluetooth Compact Flash Card close to a microwave oven in use. There may be a risk
that the system will be disturbed.
Heat, direct sunlight
Avoid installing the Compact Flash near sources of heat or in direct sunlight.
Use only appropriate Region settings
Use only the region setting appropriate for the area where the Bluetooth application is used at the
present time. Using the LSE039 Compact Flash in any other region or with an incorrect region setting
may be illegal.
Connect only to SELV circuits
The Compact Flash is classified as an SELV (safety extra low voltage) circuit according to the
electrical safety standards EN 60950/IEC 950/UL 1950 (Safety of information technology equipment).
For this classification to be maintained, equipment to which the unit is connected must also be
classified as an SELV circuit.
10.4.2
Operating
Environment
