background image

 

National Semiconductor

                                                      

DAC161P997EVAL User’s Guide

 

 

 2011 National Semiconductor Corporation                                                           Page 11 of 11                                                                    Rev: 0.00

 

 

BY USING THIS PRODUCT, YOU ARE AGREEING TO BE BOUND BY THE TERMS AND CONDITIONS OF NATIONAL 

SEMICONDUCTOR'S END USER LICENSE AGREEMENT. DO NOT USE THIS PRODUCT UNTIL YOU HAVE READ AND 

AGREED TO THE TERMS AND CONDITIONS OF THAT AGREEMENT. IF YOU DO NOT AGREE WITH THEM, CONTACT 

THE VENDOR WITHIN TEN (10) DAYS OF RECEIPT FOR INSTRUCTIONS ON RETURN OF THE UNUSED PRODUCT FOR 

A REFUND OF THE PURCHASE PRICE PAID, IF ANY. 

 

 

 

The  DAC161S055  Evaluation  Board  is  intended  for  product  evaluation  purposes  only  and  is  not  intended  for  resale  to  end 

consumers, is not authorized for such use and is not designed for compliance with European EMC Directive 89/336/EEC, or for 

compliance with any other electromagnetic compatibility requirements. 

National Semiconductor Corporation does not assume any responsibility for use of any circuitry or software supplied or described. 

No circuit patent licenses are implied. 

LIFE SUPPORT POLICY 

NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR 

SYSTEMS  WITHOUT  THE  EXPRESS  WRITTEN  APPROVAL  OF  THE  PRESIDENT  OF  NATIONAL  SEMICONDUCTOR 

CORPORATION. As used herein: 

 

1.  Life  support  devices  or  systems  are  devices  or  systems  which,  (a)  are  intended  for  surgical  implant  into  the  body,  or  (b) 

support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in 

the labeling, can be reasonably expected to result in a significant injury to the user. 

2.  A  critical  component  is  any  component  in  a  life  support  device  or  system  whose  failure  to  perform  can  be  reasonably 

expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 

 

 

National Semiconductor Corporation 

Americas 

Tel:      1-800-272-9959 

Fax:     1-800-737-7018 

Email: [email protected] 

National Semiconductor Europe 

Fax: +49 (0) 1 80-530 85 86 

Email: [email protected] 

Deutsch Tel: +49 (0) 699508 6208 

English   Tel: +49 (0) 870 24 0 2171 

French Tel: +49 (0) 141 91 8790 

National Semiconductor 

Asia Pacific Customer 

Response Group 

Tel:  65-2544466 

Fax: 65-2504466 

Email:[email protected] 

National 

Semiconductor 

Japan Ltd. 

Tel:   81-3-5639-7560 

Fax:  81-3-5639-7507 

www.national.com 

 

 

 

National does not assume any responsibility for any circuitry described, no circuit patent licenses are implied and National reserves the right at any 

time without notice to change said circuitry and specification.

 

Summary of Contents for DAC161P997













Reviews: