![background image](http://html.mh-extra.com/html/national-semiconductor/adc08100/adc08100_instruction-manual_710395013.webp)
APPENDIX
Summary Tables of Test Points and Connectors
Test Points on the ADC08100 Evaluation Board
TP 1
Power Down Input. Pull high to power down the ADC08100
TP 2
ADC Top Reference Voltage
TP 3
Ground
TP 4
ADC Bottom Reference Voltage
TP 5
Ground
TP 6
Ground
TP 7
Signal Input test point
TP 8
Ground
TP 9
+3V Supply
P1 Connector - Power Supply Connections
J1-1
+5V
Positive Power Supply
J1-2
GND
Power Supply Ground
J1-3
+5V
Logic and Digital Interface Board Supply
J1-4
-5.2V
Negative Power Supply
J1 Connector - Number of Memory Chips Used (hard wired)
Connect 1-2
One Memory Chip (Default)
Connect 2-3
Two Memory Chips
J2 and JP3 - Not Used
J4 Connector - ADC Clock selection jumper settings
Connect 1-2
Divide frequency of Y1 by 2 (Default)
Connect 2-3
Use frequency of Y1
J5Connector - Divide Enable
Connect 1-2
Two Memory Chips
Connect 2-3
One Memory Chip (Default)
13
http://www.national.com