National Nail 0136010ST, Owner'S Manual, Page: 10 / 96

www.stingerworld.com
CS150ST
Cap Stapler
CS150ST
REPAIR, MAINTANANCE & STORAGE
REPAIR
1.
!
Repair and maintenance shall only be carried out by specialists experienced with servicing the STINGER
CS150ST .
MAINTENANCE
1.
!
Disconnect the air hose from the tool when performing inspections, maintenance or repairs.
2.
!
Use air line lubricators. If lubricators are not available, or if hose length exceeds 10 feet, add 2 drops of non-
detergent 20-weight oil daily into the air inlet of the tool.
3.
!
Whenever repairs or replacement of parts inside the body occur, check the piston “O” ring for adequate grease
lubrication.
4.
!
Never use any parts other than genuine STINGER replacement parts. To order, call 800-746-5659.
5.
!
Periodically clean the Magazine and Nose of the tool with a mild solvent.
STORAGE
1.
!
Disconnect the air hose when storing the tool.
2.
!
Never store the tool in cold weather environments for any duration of time as any frost or ice formation in the
tool will cause tool failures.
3.
!
For prolonged storage, add 2 drops of oil to the air inlet of the tool prior to discontinuing use. Also clean the
exterior of the tool with a mild solvent.
7