3
HIGH
MANUAL
MED
LOW
AUTO
POLARITY
REVERSE
AC
MAINS
RUN
FAULT ID
SPEED CONTROL
BATTERY
VOLTAGE
THE FRIDGE WILL AUTOMATICALLY
CUT-OUT AT THE SELECTED
BATTERY PROTECTION LEVEL.
LOW WILL ALLOW THE BATTERY
TO BE COMPLETELY DRAINED.
THE FRIDGE WILL OPERATE AT
LOW-SPEED
WHEN BATTERY VOLTAGE IS BELOW 12.6V.
TO SELECT HIGH-SPEED AT VOLTAGES
BELOW 13.2V, PRESS THE TURBO BUTTON
THE FRIDGE AUTOMATICALLY SELECTS
HIGH-SPEED
FOR VOLTAGES ABOVE 13.2V.
12.3
12.2
12.1
11.8
11.5
11.0
10.5
10.0
9.5
12.0
13.8
13.2
12.5
12.4
TURBO
BATTERY PROTECTION
POWERPACK
ALARM
ON
DOWN
UP
SET MODE
“SET MODE” - PRESS
DOWN
FOR 3 SECONDS
TEMPERATURE
FLASHING
OVER
TEMPERATURE
SOLID
TEMPERATURE PROTECTION
WARNING
- COMPRESSOR SHUT DOWN
- COMPRESSOR LOW SPEED
Connecting power
Control Panel
1. Manual turbo mode button.
2. DC supply reversed polarity indicator.
3. Battery monitor.
4. Status indicators.
5. Battery protection level indicators.
6. Audible alarm ON indicator.
7. Alarm ON / OFF selector button.
The Weekender is equipped with both 12-volt DC
input as well as 230-volt AC mains input. Both power
inputs are fuse-protected and are located on the side
of the refrigerator.
Use the cables supplied in order to connect
the Weekender to an appropriate power
source.
If both the AC supply and DC supply are connected
simultaneously, the Weekender will automatically use the
AC supply.
If the AC power is interrupted, the Weekender will use the
DC supply instead.
When fitting either power cable, ensure that the plug is
pressed in firmly and does not pull loose easily.
DC
8. Battery protection level selector button.
9. Over-temperature warning indicator.
10. Temperature display.
11. Temperature UP button.
12. Temperature "set mode" indicator.
13. Temperature down / set mode button.
1
2
3
9
4
5
6
7
8
10
11
12
13
