National Luna LEGACY Fridge Manual
17
Selecting the “Turbo” mode will override the Smart Compressor
Speed Control function and the unit will run at maximum speed
For situations where maximum cooling power is
required, press and hold the “Turbo” button until the
indicator is illuminated.
This will bypass the automatic control and force
high speed operation.
This Fridge is fitted with a Smart Compressor Speed Control function which will vary the speed of the
compressor in order to conserve power and optimise performance.
On initial plug-in, the compressor will have a one minute time delay before starting.
Operating your Dual Control Fridge
Smart Compressor Speed Control
Speed Control Setting
Using the TURBO function may increase power consumption
At the start of each cycle the Fridge will automatically run at low speed for 3 minutes to equalize gas
pressure in the system.
LOW Speed:
If both compartments are set to above 0 degrees.
The compartment temperatures are within 7 degrees of set temperature.
MEDIUM Speed:
If the compartment with the coldest setting is set between 0 and -10 degrees.
The compartment temperatures are within 7 degrees of set temperature.
HIGH Speed:
If any compartment is set to below -10 degrees.
The compartment temperature is more than 7 degrees higher than the set temperature.
