©
National Instruments Corporation
I-1
VXI/VMEpc 600 Series User Manual
Index
Numbers
100B-T LED, B-4
A
ACC LED, B-3
application-specific interface chips, custom,
1-4 to 1-5
ASICs, custom, 1-4 to 1-5
B
BIOS
configuration stored in system CMOS,
3-12 to 3-13
default settings, 4-1
entering BIOS setup, 4-1
setting corrupted CMOS back to
default, D-3
viewing settings, D-2
board access LEDs
ACC, B-3
DRV, B-3
bulletin board support, E-1
C
cables, optional, 1-3
capability codes (table), VMEbus, A-3 to A-4
CLK10 signal
accuracy, D-1
definition, D-1
routing, 3-7 to 3-9
SMB CLK10 direction (figure), 3-8
SMB CLK10 polarity (figure), 3-9
SMB CLK10 termination (figure), 3-8
VXIbus CLK10 routing (figure), 3-7
CMOS, setting back to default, 3-12 to 3-13, D-3
COM1 and COM2 connectors and signals,
C-7 to C-8
common questions about VXIpc 600 Series,
D-1 to D-3
configuration, 3-1 to 3-13
default settings, 3-1 to 3-5
CPU module attached to
VXI/VMEpc-650 (figure), 3-4
jumper settings (table), 3-5
VMEpc-650 parts locator diagram, 3-3
VXIpc-650 parts locator diagram, 3-2
EEPROM, 3-10 to 3-12
EEPROM operation (figure), 3-11
fixing invalid EEPROM configuration,
3-11 to 3-12
power-on self configuration status
(figure), 3-10
PC configuration, 3-12 to 3-13
SCSI termination, 3-12
system CMOS, 3-12 to 3-13
VXI/VMEpc 600 Series, 3-6 to 3-12
EEPROM, 3-10 to 3-12
trigger input termination, 3-9
VXIbus CLK10 routing, 3-7 to 3-9
VXI/VMEbus System Controller,
3-6 to 3-7
connectors
COM1 and COM2, C-7 to C-8
Ethernet, C-6 to C-7
external SMBs, C-16
GPIB (IEEE-488.2), C-14 to C-15
keyboard and mouse, C-4
list of connectors (table), C-1
parallel port, C-9 to C-10
SCSI, C-12 to C-14
signal characteristics, C-17
Universal Serial Bus, C-11
