National Instruments VXI/VMEpc 600 series Getting Started Manual Download Page 15 | Manualshive

Page: 15 / 61

background image

Chapter 1

Introduction

VXI/VMEpc 600 Series for Windows 95/NT

1-4

©

National Instruments Corporation

•

NI-VISA for Windows 95/NT—This is a 32-bit driver designed for
Windows 95/NT. Note that for VME and VXI support, the NI-VXI
driver must be installed. You can use this driver to develop and run
32-bit applications for Windows 95/NT.

National Instruments Application Software

Your VXI/VMEpc 600 Series kit comes with the NI-VXI/VISA bus
interface software already installed for you. In addition, you can use the
National Instruments LabVIEW and LabWindows/CVI application
programs and instrument drivers to ease your programming tasks. These
standardized programs match the modular virtual instrument capability of
VXI/VME and can reduce your VXI/VME software development time.
These programs are fully VXIplug&play compliant and feature extensive
libraries of VXI instrument drivers written to take full advantage of direct
VXI control. LabVIEW and LabWindows/CVI include all the tools needed
for instrument control, data acquisition, analysis, and presentation.

LabVIEW is a complete programming environment that departs from the
sequential nature of traditional programming languages and features a
graphical programming environment.

LabWindows/CVI is an interactive C development environment for
building test and measurement and instrument control systems. It includes
interactive code-generation tools and a graphical editor for building custom
user interfaces.

When you boot your system for the first time, you can insert a configuration
disk to access either or both of these application programming
environments. Refer to the

Booting Your System for the First Time

section

Setting up Your VXI/VME System

, for more information. Both

LabVIEW and LabWindows/CVI integrate the VXI and VISA libraries that
are required to support your VXI/VMEpc-650. You also get hundreds of
complete instrument drivers, which are modular, source-code programs
that handle the communication with your instrument to speed your
application development.

«
...
13
14
15
16
17
...
»

Summary of Contents for VXI/VMEpc 600 series






























































Reviews:

No comments

Related manuals for VXI/VMEpc 600 series

Brand: Mamiya Pages: 4

imagePROGRAF iPF830

Brand: Canon Pages: 16

Brand: Canon Pages: 6

Brand: Calira Pages: 14

Brand: Campbell Pages: 62

Brand: Campbell Pages: 26

Brand: CAMPAGNOLO Pages: 133

Brand: Campbell Pages: 34

Brand: CAMPARK Pages: 20

Brand: R.M. Young Pages: 4

Brand: Campbell Pages: 36

Brand: Campbell Pages: 2

Brand: PAJ Pages: 95

Brand: Watts Pages: 8

Brand: HALE Pages: 44

Brand: Tascam Pages: 4

Brand: Tascam Pages: 2

Brand: Tascam Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands