GETTING STARTED GUIDE
VRTS with 4 GHz Bandwidth
Automotive Radar Measurement and Object-Simulation System
This document explains how to install, configure, and test the Vehicle Radar Test System with
4 GHz Bandwidth.
The VRTS with 4 GHz Bandwidth and NI-VRTS instrument driver can be used to test
automotive radars at frequencies of 75 GHz to 82 GHz.
Contents
Unpacking the Kit..................................................................................................................... 1
Required Equipment................................................................................................................. 2
Verifying the System Requirements..........................................................................................2
Installing the Software.............................................................................................................. 2
Installing the Hardware.............................................................................................................3
Installing the VRTS with 4 GHz Bandwidth Modules..................................................... 3
Installing Antennas onto the mmRH-5591....................................................................... 4
Setting up the mmRH-5591.............................................................................................. 5
Cabling the VRTS with 4 GHz Bandwidth.......................................................................5
Configuring the VRTS with 4 GHz Bandwidth in MAX..........................................................7
Programming the VRTS............................................................................................................8
NI-VRTS Instrument Driver............................................................................................. 8
NI-VRTS VIs.................................................................................................................... 8
Using the NI Example Finder........................................................................................... 8
Using your System with Software.................................................................................... 9
Removing the VRTS with 4 GHz Bandwidth Modules............................................................9
Module Front and Back Panels............................................................................................... 10
Where to Go Next................................................................................................................... 12
Unpacking the Kit
Notice
To prevent electrostatic discharge (ESD) from damaging the device, ground
yourself using a grounding strap or by holding a grounded object, such as your
computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Notice
Never touch the exposed pins of connectors.
