![background image](http://html1.mh-extra.com/html/national-instruments/vision-cvs-1455/vision-cvs-1455_user-manual_3429982019.webp)
Chapter 2
LEDs, DIP Switches, and Connectors
©
National Instruments Corporation
2-3
NI CVS-1450 Series User Manual
Figure 2-2 shows the location of the
10/100 Mbps
LED on the
NI CVS-1450 device.
Figure 2-2.
ACT/LINK and 10/100 Mbps LEDs
DIP Switches
This section describes the
SAFE MODE
,
IP RESET
,
NO APP
, and
USER 1
DIP switches on the NI CVS-1450 device.
To enable a DIP switch, move the switch to the
ON
(left) position and then
reset the NI CVS-1450 device by pressing the
RESET
button for at least
two seconds.
Note
You must reset the NI CVS-1450 device in order for the setting change to occur.
NI 1454
Compact Vision System
Summary of Contents for Vision CVS-1455
Page 1: ...CVS 1455...