![background image](http://html1.mh-extra.com/html/national-instruments/usrp-2974/usrp-2974_getting-started-manual_710080007.webp)
Adding Hardware to SystemLink
Connect your SystemLink Server to a target with LabVIEW Communications Real-Time
Image installed to manage your device.
Note
SystemLink Client is automatically installed with the LabVIEW
Communications Real-Time Image.
1.
Launch and log in to NI SystemLink Web Application.
2.
Click
Systems Manager
»
Discovered Systems
. Since SystemLink Client is already
installed on the target, your server automatically detects it.
3.
Select the target and click
Add Selected
to register it as a managed system.
Related Information
For SystemLink Server setup instructions, refer to the SystemLink Manual.
Adding Your Device to a Project
Register your device with SystemLink or LabVIEW Communications System Design Suite
before adding it to a project.
1.
In LabVIEW Communications System Design Suite, create a new project or open an
existing sample project.
2.
In the SystemDesigner palette, navigate to the location appropriate for your version of
LabVIEW Communications System Design Suite.
Version
Step
2.0
Software Defined Radio
»
USRP RIO
»
NI USRP-2974
2.1 to Current PC
»
Devices
»
Software Defined Radio
»
USRP RIO
»
NI USRP-2974
3.
Select the
NI USRP-2974
target and place it on the diagram.
4.
In the Configuration pane, take the action appropriate for your version of LabVIEW
Communications System Design Suite.
Version
Step
2.0
Select
NI USRP-2974
from the
Mapped To
dropdown menu.
2.1 to Current
Click
Hostname
to choose a controller that has already been registered
or to change the hostname of your controller.
Note
If there is an external USRP RIO device connected to the PCIe x4 port
of the USRP-2974 back panel, you must repeat steps 2 through 4 to map to the
corresponding USRP RIO device in the Configuration pane.
USRP-2974 Getting Started Guide
|
© National Instruments
|
7