National Instruments USRP-2974 User Manual Download

Page: 1 / 18

GETTING STARTED GUIDE

USRP-2974

10 MHz to 6 GHz, x86 Processor, GPS-Disciplined OCXO, USRP
Software Defined Radio Stand-Alone Device

This document explains how to install, configure, and test the USRP-2974 Software Defined
Radio Stand-Alone Device.

The USRP-2974 can send and/or receive signals for use in various communications
applications. The device ships with the NI-USRP instrument driver, which you can use to
program the device.

Contents

Verifying the System Requirements..........................................................................................1
Unpacking the Kit..................................................................................................................... 2

Verifying the Kit Contents................................................................................................ 2

Installing the Software.............................................................................................................. 3
Connecting to a Computer........................................................................................................ 3

Powering on the Device.................................................................................................... 4

Programming the Device.......................................................................................................... 4

NI-USRP Instrument Driver............................................................................................. 4
NI-USRP Sample Project..................................................................................................5
Using Your Device with Software.................................................................................... 5

Troubleshooting........................................................................................................................ 8

Device Troubleshooting.................................................................................................... 8
Network Troubleshooting................................................................................................. 8

Front Panel, Back Panel, and Connectors............................................................................... 11

Direct Connections to the USRP-2974............................................................................11
USRP-2974 Front Panel, Back Panel, and LEDs ...........................................................11

Where to Go Next................................................................................................................... 17
Worldwide Support and Services............................................................................................ 17

Verifying the System Requirements

To use the NI-USRP instrument driver, your system must meet certain requirements.

Refer to the product readme, which is available on the driver software media or online at

ni.com/manuals

, for more information about minimum system requirements, recommended

system, and supported application development environments (ADEs).

Summary of Contents for USRP-2974



















Search results

Summary of Contents for USRP-2974

Reviews:

Related manuals for USRP-2974

Brands by name

Popular brands

National Instruments USRP-2974, Getting Started Manual

Search results

Summary of Contents for USRP-2974

Reviews:

Related manuals for USRP-2974

Brands by name

Popular brands