Storage ambient temperature range
-40 °C to +71 °C (Tested in accordance with
MIL-PRF-28800F (Class 3).)
Maximum altitude
4,600 m operational
Pollution Degree
2
Indoor use only.
Note
For detailed specifications, refer to the NI 5683 specifications document at
.
Installing the Software
You must be an Administrator to install NI software on your computer.
1.
Install an ADE, such as LabVIEW or LabWindows
™
/CVI
™
.
2.
Insert the driver software media into your computer. The installer should open
automatically.
If the installation window does not appear, navigate to the drive, double-click it, and
double-click
autorun.exe
.
3.
Follow the instructions in the installation prompts.
Note
Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
4.
When the installer completes, select
Restart
in the dialog box that prompts you to restart,
shut down, or restart later.
Installing the Hardware
Install the NI-568x software before installing the hardware.
1.
Ensure that the NI-568x software is installed.
Note
If you connect the NI 5683 to a PC or chassis before installing the
software, the PC or chassis does not recognize the NI 5683.
2.
Connect the A-Type USB connector to the PC or chassis and secure the Mini-B USB
connector to the power meter using the anchor screw.
Note
The NI 5683 has a power requirement of approximately 450 mA. If you
plan to use the device through a USB hub, NI recommends using an external
power source.
Refer to the following figure for an example of a completed installation.
4
|
ni.com
|
NI 5683 Getting Started Guide
