©
National Instruments Corporation
11
TBX-1329 Installation Guide
Figure 4.
Connecting the SH32-32-A Cable to the TBX-1329 Terminal Block
5.
Connect one end of the cable assembly to your SCXI module front
connector and secure the SH32-32-A cable by tightening both
backshell mounting screws.
6.
Connect the other end of the cable assembly to your TBX-1329
terminal block connector and secure the SH32-32-A cable by
tightening both backshell mounting screws.
7.
Reconnect the DAQ device to your SCXI chassis.
1
Backshell Mounting Screws and Ears
2
Safety Ground Lugs
3
Captive Cover Screws
4
Terminal Block Connector
5
Signal Wire Entry
Note:
The SH32-32-A cable is not shown in the exact position for proper connection to the terminal block
connector. See Figure 5 for the completed connection.
3
1
2
3
5
4
1
