National Instruments
™
, NI
™
, ni.com
™
, and SCXI
™
are trademarks of National Instruments Corporation. Product and company names mentioned herein
are trademarks or trade names of their respective companies.
3
7
2735C-01
©
2000
,
2001 National Instruments Corp. All rights reserved.
October 2001
INSTALLATION GUIDE
SCXI-1362 A
DAPTER
K
IT
This guide explains how to unpack, install, and clean the SCXI-1362
adapter kit. With the SCXI-1362 adapter kit, you can connect the NI 4021
or NI 4060 to the following switch modules: SCXI-1160, SCXI-1161,
SCXI-1163R, SCXI-1190, SCXI-1191, or SCXI-1192.
The following connections are possible using the SCXI-1362 kit:
•
Use the SH9MD-AUX cable to connect the digital communication
signals from the NI 4021 or NI 4060 to the AUX IN connector of the
SCXI-1362.
•
In SCXI multichassis configurations, use a SH9MD-AUX cable to
extend the digital communication signals to the next SCXI chassis.
Note
The maximum total cable length from the NI 4021 or NI 4060 to the farthest chassis
should not exceed 10 meters.
Checking The SCXI-1362 Adapter Kit Contents
Make sure the SCXI-1362 kit includes the following components:
❑
One SCXI-1362 adapter
❑
One SH9MD-AUX cable (round, 9-pin DIN connector)
❑
Two small screws
Note
If you ordered only the SCXI-1362 adapter, the kit should include the backplane
adapter but no cables.
You must provide the following:
❑
SCXI chassis
❑
SCXI-1160, SCXI-1161, SCXI-1163R, SCXI-1190, SCXI-1191,
and/or SCXI-1192
