![background image](http://html1.mh-extra.com/html/national-instruments/scxi-1325/scxi-1325_installation-manual_3506868002.webp)
National Instruments™, ni.com™, and SCXI™ are trademarks of National Instruments Corporation. Product and company names are trademarks or
trade names of their respective companies.
321929B-01
©
Copyright 1993, 1999 National Instruments Corp. All rights reserved.
November 1999
INSTALLATION GUIDE
SCXI -1325 H
IGH
-V
OLTAGE
T
ERMINAL
B
LOCK
This guide describes how to install and use the SCXI-1325 high-voltage
terminal block with the SCXI-1124 module.
Introduction
The SCXI-1325 high-voltage terminal block is a shielded board with
26 screw terminals for easy connection to the SCXI-1124 input connector.
One pair of screw terminals connects to the SCXI-1124 chassis ground.
The remaining 24 screw terminals are for signal connection to the
six module output channels.
What You Need to Get Started
To set up and use your SCXI-1325 terminal block, you need the following
items:
❑
SCXI-1325 high-voltage terminal block
❑
SCXI-1325 High-Voltage Terminal Block Installation Guide
❑
SCXI chassis
❑
SCXI-1124 module
❑
Number 1 and 2 Phillips-head screwdrivers
❑
1/8 in. flathead screwdriver
❑
Long-nose pliers
❑
Wire cutter
❑
Wire insulation stripper
™
Summary of Contents for SCXI-1325
Page 9: ......