SCXI ™ is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names of their respective
companies.
3
71195A
-01
©
Copyright 1994, 1997 National Instruments Corp. All rights reserved.
August 1997
SCXI-1371 R
ACK
-M
OUNT
K
IT
This guide describes how to attach the SCXI-1371 rack-mount kit to an
SCXI-1000, SCXI-1000DC, or SCXI-2000 chassis.
Introduction
You can use the SCXI-1371 rack-mount kit to mount an SCXI-1000,
SCXI-1000DC, or an SCXI-2000 chassis in a standard 19 in. rack. With
the multiposition rack-mount brackets, you can install the SCXI chassis
in one of six different positions to attain the desired front panel depth.
What You Need to Get Started
❑
SCXI-1371 rack-mount kit
Rack-mount bracket
Four 8-32 by 5/16 in. Phillips flathead screws
Four 10-32 by 1/2 in. Phillips panhead screws
Rack-mount bracket for the 4-slot SCXI-1371 chassis (with the
longer side panel)
Brace for the 4-slot SCXI-1371 chassis
Four 6-32 hex nuts
Four no. 6 lockwashers
Two 6-32 by 1/4 in. Phillips panhead screws
SCXI-1371 Rack-Mount Kit Installation Guide
❑
No. 2 Phillips-head screwdriver
❑
5/16 in. nut driver
❑
SCXI chassis
