©
National Instruments Corporation
7
NI SCC-CTR01 User Guide and Specifications
Installing the Software
Software support for the NI SCC-SCTR01 for Windows Vista/XP/2000 is
provided by NI-DAQmx. The
DAQ Getting Started Guide
, which you can
download at
ni.com/manuals
, offers NI-DAQmx users step-by-step
instructions for installing software and hardware, configuring channels and
tasks, and getting started developing an application.
Installing Other Software
If you are using other software, refer to the installation instructions that
accompany your software.
Device-Specific Information
Note
For general SCC module installation and signal connection information, and
information about the NI SC-2345 carrier, refer to the
SCC Quick Start Guide
, available
for download at
ni.com/manuals
.
Installing the Module
Caution
Refer to the
Read Me First: Safety and Radio-Frequency Interference
document
before removing equipment covers or connecting/disconnecting any signal wires.
Note
When using the SCC-CTR01, groundthe chassis of the DAQ device.
Plug the NI SCC-CTR01 into either general-purpose counter/timer socket
J19 or J20 on the NI SC-2345. When you configure the NI SC-2345
according to the procedure in the
SCC Quick Start Guide
, the NI SC-2345
routes the CTR_SRC, CTR_GATE, and CTR_OUT signals through the
module.
