©
National Instruments Corporation
7
SCC-A10 Voltage Attenuator Module User Guide
Safety
The SCC-A10 meets the requirements of the following standards for safety
and electrical equipment for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 3111-1:UL 61010B-1
•
CAN/CSA C22.2 No. 1010.1
Note
For UL and other safety certifications, refer to the product label, or visit
ni.com/hardref.nsf
, search by model number or product line, and click the
appropriate link in the Certification column.
Electromagnetic Compatibility
Emissions ............................................... EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Immunity ................................................ EN 61326:1997 + A2:2001,
Table 1
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Note
For full EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety) ............. 73/23/ECC
Electromagnetic Compatibility
Directive (EMC) .................................... 89/336/EEC
Note
Refer to the Declaration of Conformity (DoC) for this product for any
additional regulatory compliance information. To obtain the DoC for this product,
visit
ni.com/hardref/nsf
, search by model or product line, and click the appropriate
link in the Certification column.
