©
National Instruments Corporation
E-1
SCB-68 Shielded Connector Block User Manual
E
Soldering and Desoldering
on the SCB-68
Some applications discussed here require you to make modifications to the
SCB-68, usually in the form of adding components to the printed circuit
device.
To solder and desolder components on the SCB-68, refer to Figure 2-1,
SCB-68 Printed Circuit Diagram
, and to Figure E-1, and complete the
following steps to remove the SCB-68 from its box.
Figure E-1.
SCB-68 Parts Locator Diagram
Note
If the kit is missing any of the components in Figure E-1, contact NI by selecting
Contact NI
at
ni.com
.
1
Quick Reference Label
2
Cover
3
68-Pin Connector
Screws
4
Lock Washers
5
Shielding Screws
6
68-Pin I/O Connector
7
Base
8
Strain-Relief Bars
9
Strain-Relief Screws
10 Circuit Card Assembly
2
3
4
5
7
9
8
1
10
6
