PXIe-4309 and TB-4309 (ST)/TB-4309 (MT)
|
© National Instruments
|
9
To connect signals to the TB-4309 (MT), use a cable with a VHDCI connector to mate with
the TB-4309 (MT), and a breakout accessory. The recommended NI accessories are the
SHC68-68-EPM cable and SCB-68A terminal block. Figure 5 illustrates the TB-4309 (MT)
receptacle locations. Figures 6 and 7 show the pin assignments for each connector.
Note
You can find the pinout names and locations in Measurement & Automation
Explorer (MAX) at any time by right-clicking the device name under
Devices and
Interfaces
and selecting
Device Pinouts
.
Figure 5.
TB-4309 (MT) Front Panel Connector Locator Diagram
TB-4
3
09
3
2 Ch AI
Hi
g
h Re
s
olution
CONNECT
OR 0
CONNECT
OR 2
CONNECT
OR 1
CONNECT
OR
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
