Chapter 1
Setting up the SC-2345/2350 Carrier
©
National Instruments Corporation
1-5
SC-2345/2350 Carrier User Manual
Figure 1-1.
SCC Connector Block Configuration Window
a.
Specify the
SCC Carrier Type
. The location of the SCC sockets
changes depending on the SCC carrier type.
b.
In the drop-down listbox under
DAQ Device
, select the
E/M Series DAQ device that is connected to the SC-2345 carrier.
c.
Type the SCC Connector Block ID. The default value is
SCC1
.
d.
In the
J21
drop-down listbox next to
Power
, select the correct
SC-2345 power configuration. Refer to
Connecting Power to the
SC-2345/2350 Carrier
section
for information about power
configurations.