Chapter 1
Setting up the SC-2345/2350 Carrier
©
National Instruments Corporation
1-3
SC-2345/2350 Carrier User Manual
❑
Software
–
NI-DAQ 7.4 or later for Windows 2000/NT/XP
Note
Software scaling of measurements is not supported on the Macintosh operating
system.
❑
Documentation
–
SCC Quick Start Guide
–
100-pin or 68-pin E/M Series DAQ device documentation
–
DAQ Getting Started Guide
–
Read Me First: Safety and Radio-Frequency Interference
–
SC-2345 carrier Quick Reference Label, if you have an SC-2345
carrier
❑
Tools
–
1/8 in. flathead screwdriver
–
Numbers 1 and 2 Phillips screwdrivers
–
Wire insulation strippers
Installing the Driver Software
Install your application development environment (ADE) software and/or
NI application software, if you have not already done so, according to their
instructions.
Install NI-DAQ, which came with the DAQ device, if you have not already
done so. If you do not have version NI-DAQ 7.4 or later, you can either
download it from the National Instruments Web site at
ni.com/
downloads
or contact a sales representative to request a CD.
Follow the software prompts to install NI-DAQ. If you do not see the Install
NI-DAQ screen when you insert the CD, go to the Windows
Start»Run
.
Type
x:\setup.exe
(
x
is the letter of your CD drive). The NI-DAQ
installer detects the language of your operating system and the screens
appear in that language.