background image

by device type. You can set the boot order by altering the 

1st Boot Device

2nd Boot

Device

, and 

3rd Boot Device

 settings.

To boot from a different device without permanently changing the boot order, press
<F10> during POST. After the BIOS completes the POST and just before the controller
boots the OS, the 

Boot

 menu is displayed. You can select the device type you want to

boot from.

Hard Drive Recovery

PXIe-8861 controllers preinstalled with Windows include two methods of restoring the
original factory condition of your drive. Solid state drive-based recovery stores a factory
backup on a separate portion of your drive, allowing you to restore your controller without
additional media. You also can recover the system using external recovery media created by
NI (p/n 502202A-00) or by using Windows Recovery tools.

Note

 

The drive recovery hot key is <1>. To access the drive-based recovery tool,

press and hold <1> when video first appears during the boot process.

Note

 

Recovering the OS erases the contents of your hard disk. Back up any files

you want to keep.

Upgrade Information

You can change the amount of installed RAM on the PXIe-8861.

National Instruments offers the following SO-DIMMs for use with the PXIe-8861 controller.

8 GB DDR4-2133 compatible SO-DIMM (NI part number 786777-01)

16 GB DDR4-2133 compatible SO-DIMM (NI Part number 786776-01)

Note

 

National Instruments has tested and verified that the SO-DIMMs we sell

work with the PXIe-8861 controller. We recommend you purchase your SO-DIMM
modules from National Instruments. Other off-the-shelf SO-DIMM modules are not
guaranteed to work properly.

16

  | 

ni.com

  | 

PXIe-8861 User Manual

Summary of Contents for PXIe-8861























Reviews: