manualshive.com logo in svg

National Instruments PXIe-8861, User Manual

Share
Download
National Instruments PXIe-8861 User Manual Download Page 12

boot support are displayed in the 

Boot Option Priorities

 menu. The default value is

Enabled

.

•

PXE Network Boot

—This setting specifies whether the PXE network boot agent is

enabled. When enabled, the Intel Boot Agent is displayed in the 

Boot Option Priorities

menu, allowing you to boot from a PXE server on the local subnet. Note that the Intel
Boot Agent device names are preceded by 

IBA GE Slot

 in the 

Boot Option Priorities

menu. You must restart the system for this setting to take effect. The default value is

Disabled

.

•

Boot Option Priorities

—These settings specify the order in which the BIOS checks for

bootable devices, including the local hard disk drive, removable devices such as USB
flash disk drives or USB CD-ROM drives, or the PXE network boot agent. The BIOS
first attempts to boot from the device associated with 

1st Boot Device

, followed by 

2nd

Boot Device

, and 

3rd Boot Device

. If multiple boot devices are not present, the BIOS

setup utility does not display all these configuration options. To select a boot device,
press <Enter> on the desired configuration option and select a boot device from the
resulting menu. You also can disable certain boot devices by selecting 

Disabled

.

Note

 

Only one device of a given type is shown in this list. If more than one device

of the same type exists, use the 

Device BBS Priorities

 submenus to re-order the

priority of devices of the same type.

The following submenus are displayed if one or more bootable devices of the corresponding
type is present:
•

Hard Drive BBS Priorities

—Use this setting to access the 

Hard Drive BBS Priorities

submenu to re-order or disable bootable hard drive devices. Refer to the 

Hard Drive BBS

Priorities Submenu

 section for more information.

•

CD/DVD ROM Drive BBS Priorities

—Use this setting to access the 

CD/DVD ROM

Drive BBS Priorities

 submenu to re-order or disable bootable CD/DVD ROM drive

devices. Refer to the 

CD/DVD ROM Drive BBS Priorities Submenu

 section for more

information.

•

Floppy Drive BBS Priorities

—Use this setting to access the 

Floppy Drive BBS

Priorities

 submenu to re-order or disable bootable floppy drive devices. Refer to the

Floppy Drive BBS Priorities Submenu

 section for more information.

•

Network Device BBS Priorities

—Use this setting to access the 

Network Device BBS

Priorities

 submenu to re-order or disable bootable network devices. Refer to the 

Network

Device BBS Priorities Submenu

 section for more information.

12

  | 

ni.com

  | 

PXIe-8861 User Manual

Summary of Contents for PXIe-8861























Reviews:

No comments

Brands by name

Popular brands

Load more brands