Figure 2.
NI PXIe-8830mc Block Diagram
Intel
8 Series
PCH
Processor
Intel Core
i7
SO-DIMM
DDR3L SDRAM
PC3 12800
Memory Bus Ch. A
USB 2.0 x2
SATA Solid
State Drive
FLASH
Watchdog
Trigger
x8
PXI
Triggers
USB 2.0 x2
Intel I217-LM
Gigabit
PHY
RJ45
Port
SATA
x4 DMI2
LPC
PCI Express
Switch
PXI
Express
1x8
SPI
The NI PXIe-8830mc consists of the following logic blocks on one circuit card assembly
(CCA):
•
The
processor
is an Intel
®
Core
™
i7 4700EQ processor (6 MB Cache, 2.3 GHz). The
processor connects to the SO-DIMM block through the DDR3L interface supporting up
to 1600 MHz SO-DIMMs, the PCH through a x4 DMI2 (Direct Media Interface)
interface supporting up to 5 GT/s per lane.
•
The
SO-DIMM block
consists of one 64-bit DDR3L SDRAM socket that can hold up to
8 GB of memory.
•
The
Platform Controller Hub
(PCH) provides the USB, PCI Express x1, and LPC
interfaces that connect to the peripherals on the NI PXIe-8830mc.
•
The
USB
block consists of two Hi-Speed USB 2.0 connectors.
•
The
Ethernet Port
block consists of an Intel
®
I217-LM Gigabit Ethernet Connection.
•
The
Watchdog
block consists of a watchdog timer that can reset the processor module or
generate triggers.
•
The
PXI Express Connectors
connect the NI PXIe-8830mc to the PXI Express/
CompactPCI Express backplane.
National Instruments Software
National Instruments has developed several software tools you can use with the
NI PXIe-8830mc.
National Instruments’ hardware and software work together to help you make the most of your
PXI Express system. The LabVIEW, Measurement Studio, and LabWindows
™
/CVI
™
NI PXImc Devices User Manual
|
© National Instruments
|
5
