©
National Instruments Corporation
4-1
4
Common Configuration
Questions
This chapter answers common configuration questions you may have when
using a NI PXIe-8100 embedded controller.
General Questions
What do the LEDs on the NI PXIe-8100 front panel mean?
Refer to the LED status descriptions in the
section of
After shutting down my NI PXIe-8100 controller, the Ethernet LEDs
continue to blink. Is it safe to remove my controller or disconnect
power?
The NI PXIe-8100’s Intel 82567V Ethernet device remains powered even
after shutdown. It is safe to remove your controller or disconnect power.
How do I check the configuration of the memory, hard drive,
time/date, and so on?
You can view these parameters in the BIOS setup. To enter the BIOS setup,
reboot the NI PXIe-8100 and press <Delete> during the memory tests.
Refer to the
, for more information.
Can I use the internal ATA drive and an external hard drive at the
same time?
Yes. Refer to the
, for more information.
