background image

Where to Go Next

Refer to the following figure for information about other product tasks and associated
resources for those tasks.

SUPPORT

Services

ni.com/services

NI Community

ni.com/community

Software Support

ni.com/info>swsupport

Support

ni.com/support

SOFTWARE

HARDWARE

NI PXIe-7821R Specifications

ni.com/manuals

PXI Express Controller Documentation

ni.com/manuals

PXI Express Chassis Documentation

ni.com/manuals

Configuring a Project

NI-RIO Help

Learn LabVIEW Basics
ni.com/gettingstarted

NI R Series Examples

NI Example Finder

Where to Go for Support

The National Instruments Web site is your complete resource for technical support. At 

ni.com/

support

 you have access to everything from troubleshooting and application development self-

help resources to email and phone assistance from NI Application Engineers.

National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world to
help address your support needs. For telephone support in the United States, create your
service request at 

ni.com/support

 and follow the calling instructions or dial 512 795 8248. For

telephone support outside the United States, visit the Worldwide Offices section of 

ni.com/

niglobal

 to access the branch office Web sites, which provide up-to-date contact information,

support phone numbers, email addresses, and current events.

10

  | 

ni.com

  | 

NI PXIe-7821R Getting Started Guide

Summary of Contents for PXIe-7821R












Reviews: