background image

Using NI 

Software

 with the PXIe-5842

Making a First Measurement

You can verify proper installation and configuration of your device by making a

measurement using InstrumentStudio.

1. Depending on your instrument, connect the relevant RF input and RF output

ports using the appropriate cable.

Instrument

Connection

PXIe-5842 VST

Ports: PXIe-5842 RF IN to RF OUT

Cable: SMA (m)-to-SMA (m)

2. Launch InstrumentStudio at 

Start

 » 

National Instruments

 »

InstrumentStudio

.

3. Click 

File

 » 

New

 » 

RF Signal Generator

.

4. Generate a 1 GHz CW tone RF signal at the RF output terminal of your

instrument.

1. Select 

CW

 in the panel for the instrument.

2. In the 

Frequency

 box, enter 1 GHz.

3. In the 

Level

 box, enter 0 dBm.

5. If the generator is not already running, click 

Run

, and set the output to 

On

.

The instrument generates a signal with the settings you specify.

6. Click 

File

 » 

New

 » 

RF Signal Analyzer

.

7. Verify on the RF signal analyzer panel that the PXIe-5842 is receiving the CW

tone.

8. Close InstrumentStudio.

ni.com

24

PXIe-5842

 Getting Started

Summary of Contents for PXIe-5842












































Reviews: