PXIe-5832 Getting Started Guide
Note
Before you begin, install and configure your chassis and controller.
This document explains how to install, configure, and test the PXIe-5832. The
PXIe-5832 is a half-duplex RF communications instrument with up to 1 GHz of
instantaneous bandwidth, designed for stimulus/response test applications. You
can program the PXIe-5832 instrument using RFmx or NI-RFSA and NI-RFSG driver
software.
The PXIe-5832 IF only instrument configuration comprises the following modules:
■
PXIe-5820 Vector Signal Transceiver
■
PXIe-3623 Vector Signal Up/Down Converter
The PXIe-5832 IF and mmWave instrument configuration comprises the following
modules:
■
PXIe-5820 Vector Signal Transceiver
■
PXIe-3623 Vector Signal Up/Down Converter
■
PXIe-5653 RF Analog Signal Generator (LO source)
■
One or two mmRH-5582 mmWave Radio Heads
There is no single instrument labeled "PXIe-5832."
© 2020 National Instruments Corporation. All rights reserved. Refer to the <National
Instruments>\_Legal Information directory for information about NI copyright,
patents, trademarks, warranties, product warnings, and export compliance.
Verifying the System Requirements
To use the PXIe-5832, your system must meet certain requirements. For more
information about minimum system requirements, recommended system, and
supported application development environments (ADEs), refer to the readme,
which is installed or available at
Unpacking the Kit
© National Instruments
3
PXIe-5832 Getting Started
