background image

4.

Click one of the following 

Mode

 buttons and complete the following associated steps to

configure your PXIe-5423 for waveform generation:

Standard Function Output

 

1.

Click one of the waveform pattern buttons to choose the type of standard
function to produce.

2.

Select a variable to set from the drop-down listbox.

3.

Set the frequency, amplitude, DC offset, phase, or duty cycle using the dial to
control the value.

Single Arbitrary Waveform Output

 

1.

Click the 

Current Waveform Pattern

 button 

 and then click 

Load

Waveform from disk

.

The Select File dialog box opens and displays waveform example files.

Note

 

You also can download a waveform by selecting 

File

»

Load

New Waveform

.

2.

Choose a waveform file and click 

OK

.

The File Load dialog box and Waveform Preview window launch. You can
close or minimize the Waveform Preview window.

3.

In the 

File Load

 dialog box, choose a waveform from the 

Waveform

 list.

4.

Click 

OK

.

5.

Click 

Run

 to start waveform generation.

To optimize the waveform, select 

Edit

»

Device Configuration

 and adjust the settings.

NI-FGEN Instrument Driver

You can control your signal generator programmatically using the supplied PXIe-5423
Interchangeable Virtual Instrument (IVI) driver and an ADE.

The NI-FGEN API features a set of operations and attributes that exercise all of the
functionality of the PXIe-5423 hardware, including configuration, control, and other model-
specific functions.

You can run the NI-FGEN examples to demonstrate basic waveform generator applications.
Examples display the functionality of the PXIe-5423 and serve as programming models and
building blocks for your own applications. LabVIEW, LabWindows/CVI, C, and .NET
examples are located at 

Start

»

All Programs

»

National Instruments

»

NI-FGEN

»

NI-FGEN

Examples

.

Generating Waveforms with NI-FGEN and
LabVIEW

1.

Launch LabVIEW.

2.

Select 

Help

»

Find Examples

.

PXIe-5423 Getting Started Guide

  | 

© National Instruments

  | 

13

Summary of Contents for PXIe-5423



















Reviews: