National Instruments PXIe-4610, Calibration Procedure

Page: 3 / 10

NI PXIe-4610 Calibration Procedure | © National Instruments Corporation | 3
Test Equipment
Table 1 lists the equipment recommended for the performance verification procedures. If the
recommended equipment is not available, select a substitute using the requirements listed in
Table 1.
Table 1. Recommended Equipment
Equipment
Recommended
Models
Where
Used Requirements
DMM NI PXI-4070 Gain and
Residual
Offset
Verification If this instrument is unavailable, use a
digitizer capable of measuring ±10 V
pk
sine
waves at 1 kHz with an amplitude uncertainty
of 0.1 dB or less, a linearity error of 100 ppm
or less and an offset measurement uncertainty
of 100
μ
V or less.
Function
Generator NI PXI-4461 Gain and
Residual
Offset
Verification If this instrument is unavailable, use a
function generator capable of sourcing
±1.0 V
pk
sine waves at 1 kHz with an
amplitude uncertainty of 0.1 dB or less and a
frequency uncertainty of 1% or less.
PXI Express
Chassis NI PXIe-1062Q — —