PXIe-4480/4481 Getting Started Guide
|
© National Instruments
|
5
1.
Ensure the AC power source is connected to the chassis before installing the module. The
AC power cord grounds the chassis and protects it from electrical damage while you install
the module.
2.
Make sure the chassis is powered off.
Caution
To protect yourself, the chassis, and the module from electrical hazards,
leave the chassis powered off until you finish installing the module.
3.
Inspect the slot pins on the chassis backplane for any bends or damage prior to installation.
Do not install a module if the backplane is damaged.
4.
Remove the protective plastic covers from all the captive screws on the module front panel.
5.
Identify a supported slot in the chassis. The PXIe-4480/4481 module can be placed only in
the supported slot types identified in Table 1. Figure 1 shows the slot type symbols of the
various slot types. Refer to your chassis documentation for more details
Figure 1.
PXI/PXIe Chassis Slot Type Symbol Location
6.
Touch any metal part on the chassis to discharge any static electricity.
7.
Ensure that the injector/ejector handle is in the unlatched (downward) position.
8.
Place the module edges into the module guides at the top and bottom of the chassis. Slide
the module into the slot until it is fully inserted.
1
Slot Type Symbols Locations
Table 1.
PXIe-4480/4481 Supported Slot Types
PXI Chassis Slot Type Symbol
Supported Slot Type Description
PXI Express Peripheral
PXI/PXI Express Hybrid Peripheral
PXI Express System Timing or Peripheral
NI PXIe-1062Q
1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
