© National Instruments
|
2-1
2
Using the PXIe-4310
This chapter describes how to connect AI input signals to the PXIe-4310. It also provides the I/O
connector signal pin assignments of the module.
Driver support for the PXIe-4310 was first available in NI-DAQmx 17.1. For the list of devices
supported by a specific release, refer to the
NI-DAQmx Readme
, available on the
version-specific download page or installation media.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and shielded accessories. Use only twisted, shielded pair cables
(Belden 83319 or equivalent) for channel connections.
Caution
When this symbol is marked on a product. This icon denotes a caution,
which advises you of precautions to take to avoid injury, data loss, or a system crash.
Isolation
The PXIe-4310 provides channel-to-channel and channel-to-earth isolation. Refer to the
PXIe-4310 Specifications
for information about Safety Voltage operating levels.
