Compliance
Electromagnetic Compatibility Information
This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) as
stated in the product specifications. These requirements and limits are designed to provide reasonable protection against harmful
interference when the product is operated in its intended operational electromagnetic environment.
This product is intended for use in industrial locations. There is no guarantee that harmful interference will not occur in a
particular installation, when the product is connected to a test object, or if the product is used in residential areas. To minimize
the potential for the product to cause interference to radio and television reception or to experience unacceptable performance
degradation, install and use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National Instruments could void your
authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, product installation requires either special considerations or
user-installed, add-on devices. See the product installation instructions for further information.
Caution
To ensure the specified EMC performance, operate this product only with shielded cables and
accessories.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com