National Instruments PXI/CompactPCI Embedded Computer NI PXI-8108 User Manual Download Page 4

Page: 4 / 83

National Instruments Corporation

NI PXI-8108 User Manual

Contents

How to Use the Documentation Set...............................................................................ix
Conventions ...................................................................................................................ix
Related Documentation..................................................................................................x

Chapter 1
Introduction

Benefits of PXI ..............................................................................................................1-1
NI PXI-8108 ..................................................................................................................1-2

Description ......................................................................................................1-2
Functional Overview .......................................................................................1-2

NI PXI-8108 Functional Description ................................................1-2

National Instruments Software ......................................................................................1-4

Chapter 2
Installation and Configuration

Installing the NI PXI-8108 ............................................................................................2-1

How to Remove the Controller from the PXI Chassis ....................................2-4

BIOS Setup ....................................................................................................................2-5

Accessing BIOS Setup Utility .........................................................................2-5
Main Setup Menu ............................................................................................2-6
Advanced Setup Menu ....................................................................................2-6

Serial Port 0 Configuration Submenu.................................2-10
Parallel Port Configuration Submenu.................................2-10

Trigger Router Configuration Submenu ...........................................2-11

LabVIEW RT Options Setup Menu ................................................................2-11
Boot Setup Menu.............................................................................................2-12

Boot Settings Configuration Submenu .............................................2-13
Hard Drive BBS Priorities Submenu ................................................2-13
CD/DVD ROM Drive BBS Priorities Submenu...............................2-13
Floppy Drive BBS Priorities Submenu .............................................2-14
Network Device BBS Priorities Submenu ........................................2-14

Summary of Contents for PXI/CompactPCI Embedded Computer NI PXI-8108




















































































Search results

Summary of Contents for PXI/CompactPCI Embedded Computer NI PXI-8108

Reviews:

National Instruments PXI/CompactPCI Embedded Computer NI PXI-8108, User Manual, Page: 4 / 83

Search results

Summary of Contents for PXI/CompactPCI Embedded Computer NI PXI-8108

Reviews: